Wood science is the study of wood as a material that is renewable and of biological origin. In other words, the term wood science can also be known as wood technology. Wood is treated as a material in direct comparison with other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. The many Merits of timber and these technologies improve wood to be superior over other products. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. The protection of from this chemical is based on copper. Although being a good method to use for wood protection it has presents some few challenges. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.
Another wood treating method that is fast being accepted is the use of copper metal. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.
Termites cannot eat through timber treated through this method. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. The wood treated using this method last longer and is stronger.
Partner post: important source